中国桉树和相思人工林实木加工技术指南

出版时间：2007-8  出版社：科学出版社  作者：姜笑梅  页数：181  

内容概要

《Guide on Utilization of Eucalyptus and Acacia Plan》特点是以国际热带木材组织（ITTO）资助课题所研究的人工林桉树（8种）和相思（2种）10个树种分别为主线；从木材性质（包含木材解剖、木材密度和干缩、木材化学和力学性质等），木材机械加工特性到锯解、干燥、胶合与指接技术等全面地进行阐述。便于读者集中查找和使用某个树种的材性和加工利用的信息，有利于科研成果的宣传扩大和转换。

书籍目录

Ⅰ Eucalyptus citnodora  1  WOOD PROPERTIES    1.1  Anatomical characteristics    1.2 Physical properties    1.3 Mechanical properties    1.4 Chemical properties  2  GROWTH STRESS  3  MACHINING PROPERTIES    3.1  Methods    3.2  Resuits and discussions    3.3 General conclusion　4 SAWING TECHNIQUES    4.1 Strain in sawing process    4.2 BOW deformation.    4.3 Sawing inaccuracy    4.4 The influence ofend-splits on lumber recovery    4.5 Pilot sawing  5  DRYING TECHNIQUES    5.1 Air drying    5.2 Drying characteristics    5.3 Drying schedule    5.4 Pilot drying test  6  ADHESION PRoPERTIES    6.1 Finger joint    6.2 Gluing.Ⅱ Eucalyptus exserta  1  WOOD PRoPERTlES    1.1  Anatomical characteristics    1.2 Physical properties    1.3 Mechanical properties    1.4 Chemical properties  2  GROWTH STRESS  3  SAWING TECHNIQUES    3.1 Strain in sawing process    3.2  BOW deformation.    3.3 Sawing inaccuracy.    3.4 The influence ofend—splits on lumber recovery  4  DRYING TECHNIQUES    4.1 Air drying    4.2 Drying characteristics    4.3 Drying schedule　5 ADHESION PROPERTIES    5.1 Fingerjoint    5.2 GluingⅢ Eucalyptus urophylla×grandis  1  W00D PROPERTIES    1.1 Anatomical characteristics    1.2 Physical properties    1-3 Mechanical properties    1.4 Chemical properties  2 GROWTH STRESS  3 MACHINING PROPERTIES    3.1  Methods    3.2 Results and discussions    3.3 General conclusion  4 SAWING TECHNIQUES    4.1  Strain in sawing process    4.2 Bow deformation    4.3  Sawing inaccuracy    4.4 The influence of end-splits on lumber recovery  5  DRYING TECHNIQUES    5.1  Air drying    5.2 Drying characteristics    5-3 Drying schedule  6 ADHESION PROPERTIES    6.1 Fingerjoint    6.2 Materials    6 3  Method of experiments.    6 4 Result and discussionⅣ Eucalyptus grandis  1  WOOD PROPERTIES    1.1 Anatomical characteristics    1.2 Physical properties    1.3 Mechanical properties    1.4 Chemical properties  2 GROWTH STRESS  3 SAWING TECHNIQUES    3.1  Strain in sawing process    3.2 Bow deformation    3.3 Sawing inaccuracy    3.4 The influence ofend-splits on lumber recovery　　……Ⅴ Eucalyptus urophyllaⅥ Eucalyptus cloezianaⅦ Eucalyptus pellitaⅧ Eucalyptus tereticornisⅨ Acacia mangiumⅩ Acacia auriculiformisREFERENCESPLATE

编辑推荐

《Guide on Utilization of Eucalyptus and Acacia Plan》由科学出版社出版。