液压与气压传动/普通高等学校机械工程类专业双语系列教材

出版时间：2004-11  出版社：武汉工大  作者：陈奎生 编  页数：217  

前言

　　This textbook introduces some new concepts and methods aecording to the development of fluid power. It is intended for undergraduate students of mechanical design manufacturing and automation （including mechanical engineering and automation major） which announced by Chinas ministry of education in recent. It is written and compiled according to the requirement of bilingual education.　　There are 11 chapters in this book. Chapter 1 is a brief introduction to the subject of fluid power and the fluid power industry. Chapter 2 through chapter 7 cover the hydraulic components （including pump, motor, cylinder, direction control valve, pressure control valve, flow control valve, logic valve, proportional valve, servo valve and ancillary hydraulic components）, the emphasis is on understanding their construction and function. Chapters 8 through 10 cover basic hydraulic circuit, typical hydraulic system and the emphasis is on understanding their function and design. Chapter 11 covers the basic principles of pneumatics,pneumatic components and pneumatic circuits. After finishing each chapter, students are provided with key points, key terms and definitions, exercises and review questions. Pneumatic and hydraulic graphical symbols are attached at the end of this book as appendix I.　　This textbook is written and compiled by many experienced teachers from several universities and colleges.They are： Chen Kuisheng from Wuhan University of Science and Technology （chapter 1）；Ma Jian from Taiyuan University of Technology （chapter2, 6）；Huanghao from Wuhan University of Science and Technology, Zhu Jiangong from South West University of Science and Technology （chapter 3）, Rong Zhijun from Wuhan University of Science and Technology, Zhu Jiangong from South West University of Science and Technology （chapter 4）, Wan Huixiong and Yuanbin from Wuhan University of Technology （chapter 5）, Rong Zhijun from Wuhan University of Science and Technology （chapter 7）；Liu Shiping from North China Institute of Water Conservancy and Hydroelectric Power （chapter 8,9）； Huanghao from Wuhan University of Science and Technology （ chapter 10）,Wu Hongmin from Wuhan University of Technology and Tian Yong from Henan University of Technology（ chapter 11）.

内容概要

There are 11 chapters in this textbook;Introduction to fluid power, Hydraulicpumps and motors,Hydraulic cylinders,Ancillary hydraulic components, Directional control valves, pressure control valves, flow control valves and other hydraulic valves, basic hydraulic circuit, typical hydraulic systems and some examples,the design and calculation of hydraulic system,pneumatics. At the end of each chapter some exercises and notes are presented for practice and better understanding. Appendix I illustrates the pneumatic and hydraulic graphical symbols.　　This book can be used as textbook for teachers and students of mechanical engineering,and reference for engineers who major in fluid power,control engineering or automation.

书籍目录

Chapter 1  Introduction to fluid power　1.1  History of fluid power　1.2  Theory of hydraulics and hydraulic system　1.3  Advantages and disadvantages of fluid power　1.4  Hydraulic fluidsChapter 2  Hydraulic pumps and motors　2.1  Introduction　2.2  Gear pumps　2.3  Vane pumps　2.4  Piston pumps　2.5  Hydraulic motorsChapter 3  Hydraulic cylinders　3.1  Types and calculation of cylinders　3.2  Cylinder construction　3.3  Cylinder calculation and designChapter 4  Ancillary hydraulic components　4.1  Filters　4.2  Accumulators　4.3  Reservoirs　4.4  Pipes and connectors　4.5  Heat exchangerChapter 5  Directional control valves　5.1  Check valve　5.2  Shuttle valve　5.3  Sliding spool valves　5.4  Direction control valve actuation　5.5  The rotary spool valve　5.6  Parallel circuit　5.7  Direction control valve specifcationChapter 6  Pressure control valves　6.1  Introduction　6.2  Pressure relief valves　6.3  Pressure reducing valves　6.4  Sequence valves　6.5  Pressure switches　6.6  Applications of pressure control valvesChapter 7  Flow control valves and other hydraulic valves　7.2  Combined flow control and check valves　7.3  Flow regulating valve(adjustable compensted flow-control valve　7.4  Flow divider　7.5  Cartidge valve,proportional valve,servo valveChapter 8  Basic hydraulic circuit　8.1  Rapid motion circuit　8.2  Speed control　8.3  Synchronous circuit　8.4  Sequencing circuit　8.5  Counterbalance circuit　8.6  Pump-unloading circuitChapter 9  Typical hydraulic systems and some examples　9.1  The movable platform hydraulic system of modular machine tools　9.2  The hydraulic system of hydraulic press　9.3  The hydraulic system of 8-ton hydraulic truck cranes　9.4  The hydraulic system of anelectric arc steelmaking rumactChapter 10  The design and calculation of hydraulic system　10.1  Design and calculation of hydraulic system　10.2  The example of the hydraulic system designChapter 11  Pneumatics　11.1  Pneumatics overview　11.2  Air generation and treatment　11.3  Actuators　11.4  Penumatic control valves　11.5  Basic pneumatic circuitsAppendix A:Hydraulic and Pneumatic Graphic Symbols(GB/T786.1—93)References

用户评论 (总计8条)

•   对于初学者来说，既学习了专业词汇，又涨知识！
•   挺不错的书，支持
•   速度不算慢，书也是全新的，看起来是正版，包装也很好
•   服务过程很好啊，
•   不错，挺好，很满意
•   对于想在机械液压专业英语上学习的人，这本书无疑是一本很好的书，可以指导你在专业外语上的写作
•   书真的很旧了 内容不过真的挺好的 08年的 是老师推荐的 说书不错 但是看不懂啊 英语不行 每章节只有部分词 有中文注释 买液压方面的是老师还推荐了一本 就是左建明的 还行
•   编的不好，专业术语不规范。